Oce VarioPrint 1105 User Manual page 594

15
03 Copy Setting
01 Reset Setting
01 Initial Setting
Set the initial setting when the machine is reset.
02 Reset Function Setting
01 AUTO RESET Key Setting
Set the on-screen indication which is displayed when
pressing [Reset].
The factory default setting is Full Auto, and the initial
setting is the settings defined in "01Initial Setting".
02 Each Reset Setting
This setting is enabled when Initial Setting is selected
in "01 AUTO RESET Key Setting". Set the copying
conditions preset to either Mode Memory 30 or Copy
Initial Setting.
03 Finisher Mode for Full Auto
Select the Finisher mode when Full Auto is selected
as pressing [Reset].
03 Initial by Key Counter Insert
Select to reset the copying conditions to the initial
setting when inserting the key counter and the copy
card.
15-8
Utility Screen Settings
Setting options
(default is highlighted)
Copy Initial Setting (Original Setting/
Special Image/Zoom/Output Appli-
cation/Copy Mode/Paper Preset-
ting/Rotation/ADF)
Full Auto /Initial Setting
Initialize Set /Mode Memory(30)
Collated
Uncollated/ /Staple & Col-
late/Fold & Staple/Folding/Face UP/
Face Down
On /Off
VarioPrint 1105