Oce VarioPrint 1105 User Manual page 456

12
– With Back side selected:
Measure the positional gap between the front side and back side.
– Setting range:
X (horizontal) - 10 (left) to + 10 (right), Y (vertical) - 10 (top) to + 10 (bot-
tom), 1 step = 0.1 mm
4. Touch [Adjustment Start].
5. Repeat steps 2 to 4 until the desired result is obtained.
6
Touch [OK] to complete the setting. The Tray Setting Screen will be re-
stored.
7
To newly register the modified setting, touch [Register]. To simply
change the setting, proceed to step 10.
8
Touch the desired registration key on the Register Screen.
9
The Input Name Screen will be displayed. Enter the desired name.
12-34
Paper Setting
VarioPrint 1105