Oce VarioPrint 1105 User Manual page 124

5
- Copy Mode
Selects the desired simplex mode (1-1 or 2-1); or duplex mode (1-2 or 2-
2).
- Custom Size for Original
Identifies the special original size which the machine cannot detect, in or-
der to select the optimal paper size for copying or printing.
- Density Shift
Shifts each of nine density levels in four enhance modes (Text & Photo,
Text, Photo, Low Contrast) to three levels lighter or three levels darker.
- Frame/Fold Erasure
Erases border and/or fold image area using Frame (1 - 300mm), Fold (1 -
99mm), or Frame & Fold.
- Function Key
Recalls the job setting previously registered using Mode Memory at a sin-
gle touch.
- Image Centring
The original image on the original glass or in the document feeder is cop-
ied and centred on a sheet.
- Image Insert
Stores pages in memory from the original glass, and inserts the pages
into a document copied from the document feeder.
- Image Shift
Creates or removes a binding margin at the top, bottom, right and left
edges (shift amount from 0 ~ 250mm, in 1mm increments); reduces im-
age to prevent image loss (reduce & shift amount from 0 ~ 250mm, in
1mm increments).
- Interrupt Copying
Interrupts copying-in-progress to perform an urgent copy, using any of
the copier features for the interrupt job.
- Job List
Displays the Job List Screen to view the current machine status, changes
the operation order of reserve jobs, deletes the unused reserve job, or
displays the previous job list.
- Manual Shut-off
Shuts off the machine's power when pressing [Power Save] on the con-
trol panel.
- Memory Scan Mode
Scans documents into memory from the original glass and/or the docu-
ment feeder and inserts the pages into another document copied from
the document feeder. If an incompatible function is selected in this mode,
the latter function will not be selected, and an Error message will be dis-
played.
5-8
Before Making Copies
VarioPrint 1105