Oce VarioPrint 1105 User Manual page 554

13
Procedure
1
Touch [Adjustment] - [02 Finisher Adjustment] - [06 Perfect Binder Ad-
justment].
2
Touch [08 Sub Compile CD Width Adjustment] to display the Sub Com-
pile CD Width Adjustment Screen.
3
Touch [Next] or [Back] to select the paper size of the body set.
Touching [Next] continuously will change the paper size as follows.
All Size - 8.5x11 - A4 - B5 - A5 - 5.5x8.5 - 16K - A4W - B5W - A5W -
8.5x11W - 5.5x8.5W - Special
4
Touch the [COPY] tab to display the Copy Screen.
5
Select the PB tray or desired main body tray, then press [Start].
A sample pattern of perfect-bound book will be output.
6
Check that the horizontal scanning direction is equal on every page of
the body set.
If it is not equal on all pages, proceed to the next step.
If unequalness appears on the latter half of body pages while the
former half shows equalness, use 09 Clamp CD Width Adjustment.
7
If the desired result cannot be obtained, touch the [ADJUSTMENT] tab.
8
Use the touch panel keypad to enter the desired adjustment value, then
touch [Set].
Available range: -20 (wide) to +20 (narrow), 1 step = 0.1 mm
13-96
Adjustment
VarioPrint 1105