Oce VarioPrint 1105 User Manual page 470

13
Procedure
1
Touch [Adjustment] - [01 Machine Adjustment] - [01 Magnification Ad-
justment].
2
Touch [04 Printer Horizontal Adjustment <SIDE2>] to display the Print-
er Horizontal Adjustment <SIDE2> Screen.
3
Select the required paper size using [Next] or [Back]. With [Next] select-
ed each time, the display will switch as follows:
Tray1 – Tray2 – PFU upper tray – PFU middle tray – PFU lower tray
4
Select A3 paper, then press [Start] to output the sample pattern (No.
16).
5
Measure the resultant magnification perpendicular to the direction of
paper feed.
6
If the desired result cannot be obtained, touch the [ADJUSTMENT] tab
to return to the Adjustment Screen.
7
Use the touch panel keypad to enter an appropriate value, then touch
[Set].
Available range: -5 (short) to 0 (long), 1 step = 0.1%.
8
Repeat steps 3 to 7 until the desired result is obtained.
9
Touch [Return] to restore the Magnification Adjustment Menu Screen.
13-12
Paper feed
direction
Adjustment
190
VarioPrint 1105