Reducing The Power In Standby Mode (Auto Low Power) - Oce CS520 User Manual

Reducing the Power in Standby Mode (Auto Low Power)

This function automatically lowers the power after a specified period (initially 15
minutes) of copier inactivity. The LCD screen will go off.
The Auto Low Power function can be set to 5 minutes/ 10 minutes/ 15
minutes/ 30 minutes/ 60 minutes/ 90 minutes/ 120 minutes/ 240 minutes in
the Key Operator mode. For information about the Key Operator setting, see
p. 14-435.
To start a copying job, press any key on the control panel.
The Auto low power will be released and the LCD screen recovers usual brightness.
• If the Auto Shut-Off function activates at the same time, the power will be
turned off without the LCD screen becoming dark.
• The LCD screen will not go off during a duplex copying job or when the
Jam Position Screen is displayed.
Turning On the Power Switch
2-51