How To Make A Basic Copy - Oce VarioPrint 1105 User Manual

5
5.3

How to Make a Basic Copy

Follow the procedure below to make a basic copy.
Use Function key to recall the job setting previously registered using Mode
Memory. Up to five settings can be recalled.
!
Details
The following procedure is basic and not always applicable to the oper-
ation of selected copy conditions. When using a specific function, be
sure to follow the procedure described in each section.
1
Display Copy Screen.
- Touch [COPY] tab on the Machine Status Screen to display the
Copy Screen.
2
Set copy conditions as desired.
The following settings are available on the Copy Screen.
- Function Key (See p.p. 6-8)
- Original Setting (See p. 6-10)
- Special Image (See p. 6-26)
- Zoom (See p. 6-32)
- Application (See p. 8-8)
- Output Application (See p. 9-3)
- Copy Mode (See p. 6-37)
- Paper Presetting (See p. 6-53)
5-12
Before Making Copies
VarioPrint 1105