Setting Output Methods
Machine with Large Capacity Stacker LS-501+ LS-502, or with
Large Capacity Stacker LS-501 + LS-502 + Finisher FS-503:
In addition to the tray position key
[Stacker Auto] key is shown.
If you touch [Stacker Auto], in case the selected output tray and the
large capacity stacker become full or if problems occur, paper will be
automatically output to another large capacity stacker.
In addition to the tray position key
Stacker Auto key is shown.
If you touch [Stacker Auto], in case the selected output tray and the
large capacity stacker become full or if problems occur, paper will be
automatically output to another large capacity stacker.
4
Touch [OK] on the Output Tray Select Screen.
It will return to the Output Application Screen.
The output tray location is indicated by a depressed key on the front
image of the machine.
VarioPrint 1105
and the [Pile Setting] key, the
and the Pile Setting key, the
9
9-11