Oce VarioPrint 1105 User Manual page 772

17
- Connection Time Out Time
Touch [Connection Time Out Time] to display an input screen. After
entering in the field, touch [OK]. The range to be used is between
30 and 300 seconds.
- Auto Check
Select [On] or [Off].
If [On] is selected, the interval must be specified.
- Auto Check Interval Time
Touch [Auto Check Interval Time] to display an input screen. After
entering in the field, touch [OK].
4
Touch [03 CSRC Communications Test] on the CSRC Setting Menu
Screen to display the CSRC Communications Test Screen.
Touch [Start] to perform the communication test. On completing the
test, touch [Return] to restore the CSRC Setting Menu Screen.
5
Touch [OK] to complete the settings and return to the Controller NIC
Setting Menu Screen.
6
Touch [Return] to specify other settings, or touch [Exit] to finish setting.
7
After you have changed the settings, turn off the sub power, then turn
off and on the main power.
!
Details
When you turn off and on the main power, you need to wait at least 10
seconds to turn on after turning off. If you do not allow a sufficient interval
in between, the machine may not run correctly.
17-116
Machine Manager Setting
VarioPrint 1105