Oce VarioPrint 1105 User Manual page 371

Setting Output Methods
Specifications for Using Perfect Binder PB-501
- Warm-up/Low Power/Shut-Off
The perfect binder requires longer warm-up time than that required for
the main body, while the Low Power/Shut-Off mode activates at the
same time on main body and perfect binder.
We recommend you to specify the time to activate the Low Power/Shut-
Off mode in view of the frequency to use the perfect binder.
- Paper tray
– Body: Tray 1 to 5
– Cover: Tray 1 to 5 (available for Cover Print), Cover feeding tray of Perfect
binder (unavailable for Cover Print), Upper/Lower tray of the post inserter
on Folding unit (unavailable for Cover Print)
- Paper size
– Body: Standard sizes A4, B5, A5, 16K, 8.5"x11", 5.5"x8.5" (A3, B4, A4R,
11"x17", 8.5"x14", 8.5"x11"R, 8K when using Z-Fold mode)
– Wide sizes A4W, B5W, A5W, 8.5"x11"W, 5.5"x8.5"W
– Custom sizes*1 150 x 140 mm min. to 307 x 221 mm max.
– Cover: Custom size*1
– Length (head to foot): Same as that of body set (within +5 mm)
– Width: Book width x 2 + body set's thickness (1 mm or more) + (3 mm or
more of trimming width if Trimming mode is specified)
– The maximum size accommodable in each tray is as follows.
– Tray 1 to 5*2: 150 x 281 mm min. to 324 x 460 mm max.
– Cover feeding tray of Perfect binder: 150 x 281 mm min. to 330 x 472 mm
max.
– Upper/Lower tray of the post inserter on Folding unit: 182 x 281 mm min.
to 330 x 483 mm max.
- Paper weight
– Body: 62 ~ 91 g/m2 (*3Available weight can be specified from 62 ~ 71 g/
m2 to 72 ~ 91 g/m2.)
– Cover: 72 ~ 161 g/m2 (*3Available weight can be specified from 72 ~ 91
g/m2, 92 ~ 130 g/m2, to 131 ~ 161 g/m2.)
- Number of sheets to be bound: 10 sheets min. to 300 sheets max., or
within 30 mm thick*4
- Covers fed from tray 1 to 5 can be simplex- or duplex-printed, while those
loaded in the cover feeding tray of Perfect binder or the upper/lower tray
of post inserter on Folding unit cannot be printed.
- Fine Adjustment
– Cover Lead Edge Adjustment adjusts the position of front cover and body
set in widthwise direction in the range from –12.8 mm to +12.8 mm in 0.1
mm increments.
– Cover Trimming Adjustment adjusts the trimming width in the range from
–5.0 mm to +5.0 mm in 0.1 mm increments.
– Cover Image Shift Adjustment adjusts the position of image to be printed
on the front cover when using Cover Print mode.
VarioPrint 1105
9
9-53