Oce VarioPrint 1105 User Manual page 778

17
Procedure
1
Touch [04 Network Setting] - [02 Controller NIC Setting] - [14 Network
Setting Clear].
2
Touch [Initialize Execute] to recover the initial setting specified at the
time of shipment.
3
Touch [OK] to complete the settings and return to the Controller NIC
Setting Menu Screen.
4
Touch [Return] to specify other settings, or touch [Exit] to finish setting.
5
After you have changed the settings, turn off the sub power, then turn
off and on the main power.
!
Details
When you turn off and on the main power, you need to wait at least 10
seconds to turn on after turning off. If you do not allow a sufficient interval
in between, the machine may not run correctly.
17-122
Machine Manager Setting
VarioPrint 1105