Oce VarioPrint 1105 User Manual page 781

Machine Manager Setting
Procedure
1
Touch [04 Network Setting] - [02 Controller NIC Setting] - [15 SNMP
Trap].
2
Specify to use the SNMP Trap transmission and authentication failure
transmission functions.
- SNMP Trap Transmission
Select [On] or [Off] to transmit SNMP Trap or not.
- Authentication Failure Trans
Select [On] or [Off] to transmit by SNMP in the case that any au-
thentication failure in Read Community Name or Write Community
Name of SNMP occurs.
3
Specify the transmission address.
Trans Address 1 - 5 Setting
Touch the desired key from 1 to 5 of transmission address setting on
the SNMP Trap Setting Screen to display the SNMP Trap Trans Ad-
dress Setting Screen. Specify the following items, using [Previous] or
[Next] as required.
Touch [OK] to complete the settings.
- Address SNMP Trap Trans
Select [On] or [Off].
- SNMP Trap Trans Address
Touch [SMTP Trap Trans Address] to display an input screen. After
entering in the field, touch [OK].
- SNMP Trap Trans Port No.
Touch [SNMP Trap Trans Port No.] to display an input screen. After
entering in the field, touch [OK].
VarioPrint 1105
17
17-125