Non-Sort / Collated / Uncollated Output To The Primary (Main) Tray - Oce VarioPrint 1105 User Manual

Setting Output Methods
9.4.1 Non-sort / Collated / Uncollated Output to the Primary
(Main) Tray
A machine with Finisher FS-503 installed is set to collate output to the prima-
ry (main) tray by default, regardless of whether or not other optional devices
are attached. Please select an output mode by following the procedures de-
scribed below.
Note
You can change the initial output settings. For details, refer to "01 Initial
Setting" on page 16-39.
Specifications for Non-sort / Collated / Uncollated Output to the Prima-
ry (Main) Tray
- Paper size: A3, B4, F4, A4, A4R, B5, B5R, A5, A5R, 12"x18", 11"x17",
8.5"x14", 8.5"x11", 8.5"x11"R, 5.5"x8.5", 5.5"x8.5"R, standard index pa-
per, wide size paper (maximum 324 x 460 mm)
- Paper weight: 50 - 244 g/m
- The primary (main) tray's specifications are described separately. For de-
tails, refer to "Paper Information" on page 3-3.
1
Touch [Output Application] on the Copy Screen.
The Output Application Screen appears.
The output tray location is indicated by a depressed key on the front
image of the machine. If the primary (main) tray is not selected as the
output tray, touch Output Tray to select it.
VarioPrint 1105
2
9
9-17