Oce VarioPrint 1105 User Manual page 202

6
sion, 140 mm ~ 460 mm in horizontal dimension.
- Touch [Lead Edge], [Rear Edge], or [Centre] to specify the desired
image position.
- Touch [OK] to complete the setting
!
Details
The smallest size of the custom size can be changed. Contact your serv-
ice representative for details.
- Setting Wide Size Paper
Touch [Size Setting], then touch [Wide Size Paper.]
- Touch the desired wide size key to highlight it.
- Touch [Lead Edge], [Rear Edge], or [Centre] to specify the desired
image position.
- Touch [Input Size] to display the Size Input Screen.
- Touch the vertical size key, then use the screen keypad or arrow
keys + and , to enter the vertical size.
The entered number should fall within the range from the vertical
size of the standard size corresponding to the selected wide size,
to a maximum of 324 mm.
- Touch the horizontal size key, then use the screen keypad or arrow
keys + and , to enter the horizontal size.
The entered number should fall within the range from the horizontal
size of the standard size corresponding to the selected wide size,
to a maximum of 460 mm.
6-56
Basic Job Settings
VarioPrint 1105