Adding Paste Pellets To Perfect Binder Pb-501 - Oce VarioPrint 1105 User Manual

Supplies & Handling
4.5

Adding Paste Pellets to Perfect Binder PB-501

If the Perfect Binder PB-501 is out of paste pellets, the machine warmup
cannot be completed with the following message displayed on the Machine
Status Screen, and consequently the binding operation is unavailable.
When the paste pellets run out during the binding operation, the machine
stops the job immediately and the binding operation also becomes unavail-
able.
Reminder
If you open the paste hopper cover during the binding operation, a paper
jam may be caused due to the sudden halt of the machine. Never open
the paste hopper cover while the binding operation is in process.
Be sure to use the paste GC-501 exclusively provided for Perfect Binder
PB-501.
Handle melted hot paste with great care. To ensure safety and product
reliability, observe the precautions for using paste pellets. Read "Safety
Information" on page 1-3 as well.
Do not overload the paste hopper with paste pellets.
Do not touch the lever in the paste hopper with your hand to avoid break-
down.
VarioPrint 1105
4
4-21