Oce VarioPrint 1105 User Manual page 630

16
Procedure
1
Touch [02 Function Setting] - [03 Density Setting].
2
Touch [02 User Density Setting].
3
Touch [User Density 1] or [User Density 2]. Touch [Darker] or [Lighter]
to select the desired density level to preset either between the darkest
and normal or between normal and the lightest.
4
Output density level sample sheet. Select the sample sheet from each
sample output level of [1-4], [5-8], [9-12], and [13-16], and touch the
[COPY] tab. Place the original on the original glass, and press [Start] on
the control panel. Repeat this step when outputting more than one
sample sheet for each level. Check the sample sheet and enter the de-
sired density level using the touch panel keypad on the right side. The
number entered will be displayed in the box above [Set Density].
To output the sample sheet of the specified density level, touch [Set
Density] then touch the [COPY] tab. Place the original on the original
glass, and press [Start] on the control panel.
5
Touch [OK] to complete the setting and return to the Density Setting
Menu Screen.
6
Touch [Return] to restore the Utility Menu Screen.
16-28
User Setting
VarioPrint 1105