Oce VarioPrint 1105 User Manual page 551

Adjustment
Procedure
1
Touch [Adjustment] - [02 Finisher Adjustment] - [06 Perfect Binder Ad-
justment].
2
Touch [07 Temperature Adjustment] to display the [Temperature Ad-
justment Screen].
3
Touch the [COPY] tab to display the Copy Screen.
4
Select the PB tray or desired main body tray, then press [Start].
A sample pattern of perfect-bound book will be output.
5
Check that the paste applied on the body set is dried properly.
6
If the desired result cannot be obtained, touch the [ADJUSTMENT] tab.
7
Touch [Next] or [Back] to select the position to set the temperature.
Touching Next continuously will change the position as follows.
Melt Tank Top - Melt Tank Mid - Melt Tank Low - Pasting Roller
8
Use the touch panel keypad to enter the desired adjustment value, then
touch [Set].
Available range:
Melt Tank -Top 10 to 200 °C
Melt Tank -Mid 140 to 200 °C
Melt Tank -Low 140 to 200 °C
Pasting Roller 140 to 200 °C
VarioPrint 1105
13
13-93