Oce VarioPrint 1105 User Manual page 710

17
02 Section Management Setting
Use this function to set Copy/Printer or Scanner jobs managed by the sec-
tion, and select the machine condition in which the machine stops due to
reaching the copy limit.
!
Details
If [Copy/Printer] or [Scanner] is set to Off when Section Authentication is
set to On on the Authentication Method Setting Screen, the section pass-
word is not required to enter for authentication. In this case, job count
and copy limit count will be suspended.
When [Immediately] of [Limit Reached Stop Setting] is selected, the job
is immediately suspended as soon as the copy limit is reached. In this
case, copying conditions, output data, and scanned data will not be hold.
In order to continue the job with the same section password, change the
number of the copy limit which is set to the section password or reset
counting.
When [After Print] is selected, the machine stops after completing the job as
reaching the copy limit. The message "Copy limit reached" is displayed, and
the machine stops its operation.
When [Warning Only] is selected, the message "Copy limit reached" is dis-
played as reaching the copy limit, and the next job can be continuously ex-
ecuted.
17-54
Machine Manager Setting
VarioPrint 1105