Using Perfect Binder Pb-501 - Oce VarioPrint 1105 User Manual

9
9.10

Using Perfect Binder PB-501

The machine with the optional Perfect Binder PB-501 installed automatically
attaches a copied set with a cover sheet to make a perfect-bound book, ap-
plying a dab of glue in the centerline of the cover sheet to fix the spine.
In the Perfect Binding mode, both simplex and duplex copying are available
for the body set, and also the cover sheet can be blank, simplex-printed or
duplex-printed, and even trimmed to match with the thickness of the body
set to cover.
The binding direction can be selected from left and right.
Reminder
Use only the paste GC-501 for this binder.
Handle melted hot paste only with great care.
In order to prevent degradation of paste owing to heating, ensure that the
machine is turned off when it is not in use. It is recommended that you
adjust the time settings for the low power mode and shut-off mode to the
main body to suite the usage of the Perfect Binder, since they apply to
the binder as well.
Back side of front cover
Cover lead edge
adjustment
Front side of front cover Spine width
9-50
Body set
Cover
Foot Front side of back cover
Setting Output Methods
Left binding
(When right binding,
the cover is upside down.)
Back side of back cover
Head
Cover trimming
VarioPrint 1105