Oce VarioPrint 1105 User Manual page 549

Adjustment
Procedure
1
Touch [Adjustment] - [02 Finisher Adjustment] - [06 Perfect Binder Ad-
justment].
2
Touch [06 Paste Formation Finish Position Adjustment] to display the
Paste Formation Finish Position Adjustment Screen.
3
Touch [Next] or [Back] to select the paper size of the body set.
Touching [Next] continuously will change the paper size as follows.
All Size - 8.5x11 - A4 - B5 - A5 - 5.5x8.5 - 16K - A4W - B5W - A5W -
8.5x11W - 5.5x8.5W - Special
4
Touch the [COPY] tab to display the Copy Screen.
5
Select the PB tray or desired main body tray, then press [Start].
A sample pattern of perfect-bound book will be output.
6
Check that the pasting on the body set finishes to be equalized in prop-
er position.
7
If the desired result cannot be obtained, touch the [ADJUSTMENT] tab.
8
Use the touch panel keypad to enter the desired adjustment value, then
touch [Set].
Available range: -128 (early) to +127 (late), 1 step = 0.1 mm
9
Repeat the adjustment steps from 3 to 8 until the desired result is ob-
tained.
10
Touch [Return] to restore the Perfect Binder Adjustment Mode Menu
Screen.
!
Details
If "All Size" is selected as paper size, the entered adjustment value will be
applied to all sizes. If specific paper size is selected, adjustment value will
be the sum of the entered value and the value previously specified for "All
Size".
VarioPrint 1105
13
13-91