Oce VarioPrint 1105 User Manual page 487

Adjustment
8
Check misalignment (a), in which misalignment occurs if the paper
width setting is larger than the actual width, or paper curving (b), in
which a sample set is curved if the paper width setting is smaller than
the actual width has occurred.
[Straight Mode]
[Staple Mode]
9
If the desired result cannot be obtained, touch the [ADJUSTMENT] tab.
10
Touch [Next] or [Back] to select the paper size to be adjusted. Touching
[Next] continuously will change the paper size as follows.
11x17 - A3 - B4 - 8.5x14 - A4R - 8.5x11R - 8.5x11 - A4 - B5 - A5 -
5.5x8.5 - 8x13 - 8.125x13.25 - 8.5x13 - 8.25x13 - 8K - 16K - 12x18 -
A3W - B4W - A4W - A4WR - B5W - A5W - 12x18W - 11x17W -
8.5x11W - 8.5x11WR - 5.5x8.5W - Non-Standard
11
Use the touch panel keypad to enter the desired adjustment value, then
touch [Set].
Available range: -20 (wide) to +20 (narrow), 1 step = 0.1 mm
Note
Make the width between fixing plates narrower than the paper width.
VarioPrint 1105
a
b
a
b
13
13-29