Touch Screen Adjustment - Oce VarioPrint 1105 User Manual

User Setting
16.5

05 Touch Screen Adjustment

Use this function to check the touch screen and realign the position of the
touch sensor that may have shifted.
!
Details
The Touch Screen Adjustment Screen can be accessed also by pressing
[5] of the control panel keypad with the Utility Menu Screen displayed.
Service can set the machine to forbid users to access this function from
the menu and to display the Touch Screen Adjustment Screen only when
pressing [5] with the Utility Menu Screen displayed. Contact your service
representative for details.
Procedure
1
Touch [05 Touch Screen Adjustment].
2
Touch the "+" symbol at the upper right corner, then lower left corner
on the screen. The present coordinates will be displayed in the mes-
sage area of the screen.
3
Check that the X coordinate and Y coordinate displayed in the first line
of the message area fall within the standard value displayed in the sec-
ond line.
4
Touch each [Check Button] at the upper left and lower right corners on
the screen to check if the buzzer tone functions normally.
VarioPrint 1105
16
16-53