Oce VarioPrint 1105 User Manual page 386

9
- To use the User Authentication function on the two copiers in tandem
mode, the same user/section setting is required on both copiers. In this
case, copying will be available by entering the user/section password in
the master machine only. The password will be transmitted to the tandem
machine automatically so as to enable the copying operation.For details,
refer to "03 Use Auth./Volume Track" on page 17-51.
- The image data stored in HDD can be output in tandem mode copying.
- Tandem mode is unavailable if Security Strengthen mode is activated.
1
Turn power on the two copiers, then touch [COPY] to display the Copy
Screen.
- Confirm that both copiers are ready to copy with the Copy Screen
displayed.
2
Touch [Output Application] on the Copy Screen of either copier.
The Output Application Screen will be displayed.
3
Touch [Tandem] to highlight it, then touch [OK].
9-68
Setting Output Methods
VarioPrint 1105