Oce VarioPrint 1105 User Manual page 283

Applications
The incompatible function keys will be dimmed to show inactivity.
!
Details
No Image Area Erase will be selected automatically. When using ADF to
scan the original, touch to deselect this function.
When using the Book Copy with this function, the original smaller than
the selected paper size will be printed in the centre of the copy paper
without image division performed.
3
Touch [OK] on the Application popup menu.
The Copy Screen will be restored.
4
Select the desired magnification and paper size on the Copy Screen.
!
Details
APS and AMS are automatically released, and 1.000 (100%) is selected
as a magnification ratio.
Copy mode is automatically set to 1-1. When selecting 1-2 mode, Mem-
ory Scan mode will function automatically.
5
Enter the desired print quantity from the control panel keypad.
6
Position original(s) FACE UP in the document feeder or FACE DOWN
on the original glass.
Reminder
DO NOT close the ADF when No Image Area Erase is selected.
Placing original obliquely on the original glass may cause black copy
marks.
7
Press [Start].
!
Details
Having Any Problem?
The Image Centering function may not operate properly if the lighting in
the work place is directly over the original glass. In this case, consult your
service representative about an appropriate place for installation.
VarioPrint 1105
8
8-59