Oce VarioPrint 1105 User Manual page 444

12
3. Touch [OK] to complete the setting. The Tray Setting Screen will be re-
stored.
4. Touch [OK] on the Size Setting Screen to complete the setting.
5. Proceed to step 5. (p. 12-27)
Setting Custom Size
1. Touch [Custom Size] to highlight it.
2. Touch the vertical/horizontal size key, then use the touch panel keypad
orarrow keys (,) and (+) to enter the desired size. From the minimum size
of 100 x 140 mm to the maximum size of 324 x 460 mm can be set.
3. Touch [Lead Edge], [Rear Edge], or [Centre] to specify the desired image
position.
4. Touch [OK] to complete the setting. The Tray Setting Screen will be re-
stored.
5. Proceed to step 5. (p. 12-27)
Reminder
The smallest size of the custom size can be changed. Contact your serv-
ice representative for details.
12-22
Paper Setting
VarioPrint 1105