Oce VarioPrint 1105 User Manual page 727

Machine Manager Setting
Specific setting and Description
TCP/IP Filter denial settings *
Specify to use the denial settings or not, and the range
in which to deny connections.
Network Test Ping Address
Perform ping.
* 1: f the range of the permission setting is the same as that of the denial setting, the latter setting
overrides the former.
* 2: The functions that are affected by the permission and denial settings are as follows:
HTTP servers (Web Connection, IPP), HTTP servers (Web Connection with SSL), printing over
the network (LPD, RAW Port, SMB), FTP servers (access to Scan to HDD jobs), SNMP
Specify the settings for connecting network printer, and the NetWare set-
tings. For details, refer to "02 NetWare" on page 17-871:
Specific setting and Description
02 NetWare
NetWare
NetWare
If Use
abled as the print server protocol.
Frame Type
Select the frame type.
Operation Mode
Select the required operation mode.
NetWare Pserver Setting
Print Server Name
Enter a print server name.
Print Server Password *
Specify a password for the Novell print server. This
password is shared among all the servers that are
allocated to the print server.
Polling Interval
Specify the interval with which to poll.
Bindery Disable
When Novell NetWare 4.x or later is used, specify to
enable the bindery service. If
print server does not support other print servers
that are connected to the bindery file server.
Bindery File Server Name
Specify the bindery file server name.
VarioPrint 1105
1 2
*
is selected, Novell NetWare (IPX/SPX) is en-
1
On
Setting options (highlighted: de-
fault)
On/
0.0.0.0 - 0.0.0.0 (0 - 255)
Max. 255 characters combining
symbols and alphanumerics can
be used.
Setting options (highlighted: de-
fault)
Use/
Auto Detect
IEEE802.3/Ethernet2/
IEEE802.2SNAP
Pserver
*********
Varied from machine to machine.
Max. 47 characters combining
symbols and alphanumerics can
be used.
Max. 63 characters combining
symbols and alphanumerics can
be used.
1 - 65535 (1)
On /Off
is selected, the
Max. 47 characters combining
symbols and alphanumerics can
be used.
Off
Not Use
/IEEE802.2/
/Nprinter/Rprinter
17
17-71