Oce VarioPrint 1105 User Manual page 89

Supplies & Handling
3
Place paper on the tray with any curl turning up, then move the side
guide plates and rear edge guide to the edge of the paper.
Tray 1 and 2
Tray 3, 4, and 5
- Load paper aligning it to the paper feed roller side of the tray.
- Press the release knob of the front side guide plate to move the side
guide plates, and also move the rear edge guide to the edge of the
paper.
Reminder
Do not load above the limit level, and carefully load the paper to be seat-
ed under the paper holding lever at the air nozzle.
Be sure that the side guide plates and rear edge guide are securely
aligned to the paper; otherwise the machine cannot detect the correct
paper size, or machine trouble may occur.
4
When paper is seated properly, close the paper feed roller.
VarioPrint 1105
Paper holding lever
Limit lever
Paper holding lever
Limit lever
4
4-5