Supplies & Handling
!
Details
The machine can be set to discharge the oddments of a set of tabbed
sheets automatically if the tabbed original count is less than the number
of tabbed sheets in a set. See the next page for detail.
4
Move the side guide plates to the edge of the paper.
-
Set paper aligning it to the paper feed roller side of the tray.
-
Press the release lever of the front side guide plate to move the side
guide plates, and also move the rear edge guide to the edge of the
paper.
Reminder
Be sure that the side guide plates and rear edge guide are securely
aligned to the paper; otherwise the machine cannot detect the correct
paper size, or machine trouble may occur.
5
When paper is seated properly, close the paper feed roller.
6
Push in the tray until it locks into place.
VarioPrint 1105
4
4-11