Oce VarioPrint 1105 User Manual page 530

13
Procedure
1
Touch [Adjustment] - [02 Finisher Adjustment] - [05 Saddle Stitcher
Adj.].
2
Touch [06 Fold Paper Width Adjustment] to display the Fold Paper
Width Adjustment Screen.
3
Touch the [COPY] tab to display the Copy Screen.
4
Load the desired size of paper to be adjusted on a tray, specify the
number of sheets to 5, then press [Start].
A sample pattern will be output.
5
Check that any dislocation is found in the output set.
6
If the desired result cannot be obtained, touch the [ADJUSTMENT] tab.
7
Touch [Next] or [Back] to select the paper size to be adjusted.
Touching [Next] continuously will change the paper size as follows.
All Size - 11x17 - A3 - B4 - 8.5x14 - A4R - 8.5x11R - B5R - 8x13 -
8.12x13.2 - 8.5x13 - 8.25x13 - 8K - 16KR - 12x18 - A3W - B4W - A4WR
- B5WR - 12x18W - 11x17W - 8.5x11WR - Special
8
Use the touch panel keypad to enter the desired adjustment value, then
touch [Set].
9
Available range: -20 (wide) to +20 (narrow), 1 step = 0.1 mm
Note
If the setting is too wide, the distance of misalignment may be larger.
10
Repeat the adjustment steps from 3 to 8 until the desired result is ob-
tained.
11
Touch [Return] to restore the Saddle Stitcher Adjustment Mode Menu
Screen.
13-72
Adjustment
VarioPrint 1105