Oce VarioPrint 1105 User Manual page 755

Machine Manager Setting
Procedure
1
Touch [04 Network Setting] - [02 Controller NIC Setting] - [06 SMB].
2
For each item, select or enter a required value.
- Print
Select [Use] or [Not Use].
- Net BIOS Name
Specify if required. Touch [Net BIOS Name] to display an input
screen. After entering in the field, touch [OK].
- Print Service Name
Touch [Print Service Name] to display an input screen. After enter-
ing in the field, touch [OK].
- Work Group
Touch [Work Group] to display an input screen. After entering in the
field, touch [OK].
- Scan
Select [Use] or [Not Use].
3
Touch [OK] to complete the settings and return to the Controller NIC
Setting Menu Screen.
4
Touch [Return] to specify other settings, or touch [Exit] to finish setting.
5
After you have changed the settings, turn off the sub power, then turn
off and on the main power.
!
Details
When you turn off and on the main power, you need to wait at least 10
seconds to turn on after turning off. If you do not allow a sufficient interval
in between, the machine may not run correctly.
VarioPrint 1105
17
17-99