Administrator Mode - Network Tab; Tcp/Ip - Oce VarioPrint 1105 User Manual

Browser Control Setting
18.12 Administrator Mode – Network Tab
The [Network] tab shows settings concerning the printer controller network.

18.12.1TCP/IP

TCP/IP
This screen appears when you click [TCP/IP] on the [Network] tab. The
screen is used to set a summary of the image controller interface (TCP/IP
settings).
When TCP/IP is set to disable, you still need to set parameters. Make sure to
enter parameters correctly.
- Enter for individual items.
TCP/IP, Speed, Auto IP, IP Address, Subnet Mask, Default Gateway,
RAW Port Number 1-6, Host Name, Domain Name, DNS Server, LPD.
- [Apply] button:
Click the button to apply the new settings.
- [Clear] button:
Click the button to clear the settings that were entered.
IP Filtering
This screen appears when you click [IP Filtering] under the [TCP/IP] menu.
The screen is used to specify the host address and restrict access permis-
sion. You can also use the screen to enable or disable access permission,
access refusal, and their ranges of TCP/IP filtering. When the same range is
specified for the accept setting and the refuse setting, the refuse setting has
priority over the accept setting.
VarioPrint 1105
18
18-65