Oce VarioPrint 1105 User Manual page 96

4
!
Details
Needless Tab Paper Exit
This function sets the machine to discharge the oddments of a set of
tabbed sheets automatically if the tabbed original count is less than the
number of tabbed sheets in a set, so that the next copy job can be started
afresh with the 1st tabbed sheet.
For details of Tab Paper mode, see "Copying Non-Standard Size Origi-
nals (Custom Size / Tab Paper)" on page 6-21.
Use the User Setting mode to specify whether or not to use the Needless
Tab Paper Exit function. For details refer to "02 Each Function Setting"
on page 16-23.
If the machine with this function enabled stops the current job due to a
trouble such as paper misfeed, a message will appear on the touch panel
to prompt you to check that the tabbed sheet tray source is prepared for
the next copy job to start with the 1st tabbed sheet.
Needless Tab Paper Exit may not be allowed depending on the finisher
type mounted on the machine.
4-12
Three tabbed
Originals
Load all
the five sheets
Copy from the 1st to 3rd tabbed sheet,
and automatically descharge
4th and 5th tabbed sheets.
Supplies & Handling
VarioPrint 1105