Reserve Job Setting - Oce VarioPrint 1105 User Manual

6
6.10

Reserve Job Setting

The Reserve function allows you to set up a new job while a current job is in
process. When the current job is finished, the Reserve job starts printing im-
mediately.
Service can set the machine to disable this function. Contact your service
representative, if desired.
Specifications for Reserve:
- Job settings: Max. 100
- The reserve job setting will be available after the copier starts to scan the
current job, and also available anytime while printing the current job.
1
Display the Copy Screen with the message "Ready to set reserve Job".
When scanning job is started:
- The above popup menu will be displayed.
- Touch Yes. The Copy Screen for setting reserve job will be dis-
played.
Note
Touching [No] will return to the Machine Status Screen. In this case,
touching [COPY] tab will display the Copy Screen and allows you to make
the reserve job setting.
If the machine is initially set to display the Copy Screen after scanning job
is started, the above popup menu will provide only the Close key. Touch-
ing [Close] will also display the Copy Screen to make the reserve job set-
ting.
6-64
Basic Job Settings
VarioPrint 1105