6
6.6
Zoom
In the initial settings on the Copy Screen, the magnification is automatically
set at "1.000" (full size).
This section describes how to change the magnification ratio.
6.6.1
To Copy in 1.000 Magnification Mode
Follow this procedure to make a 100% copy of the original image.
1
Close the ADF securely, then press [Reset].
The initial settings are restored. Check that [×1.0] is highlighted to indi-
cate that the 1.000 magnification is selected.
!
Details
The initial settings may be altered by the machine manager. For details,
refer to "01 Initial Setting" on page 16-39.
2
Select additional copy conditions, as desired.
Specifying paper size will release 1.000 magnification and set [Auto
Zoom] automatically. In this case, touch [x1.0] to highlight it again.
6-32
Basic Job Settings
VarioPrint 1105