Oce VarioPrint 1105 User Manual page 774

17
Procedure
1
Touch [04 Network Setting] - [02 Controller NIC Setting] - [12 AP I/F].
2
For each item, select or enter a required value.
- AP I/F
Select [Use] or [Not Use].
- AP I/F over SSL
Select [Use] or [Not Use].
- AP I/F Authentication
Select [On] or [Off].
- AP I/F Login Name
Touch [AP I/F Login Name] to display an input screen. After entering
in the field, touch [OK].
- AP I/F Login Password
Touch [AP I/F Login Password] to display an input screen. After en-
tering in the field, touch [OK].
- AP I/F Port Number
Touch [AP I/F Port Number] to display an input screen. After enter-
ing in the field, touch [OK].
- AP I/F Port Number (SSL)
Touch [AP I/F Port Number (SSL)] to display an input screen. After
entering in the field, touch [OK].
3
Touch [OK] to complete the settings and return to the Controller NIC
Setting Menu Screen.
4
Touch [Return] to specify other settings, or touch [Exit] to finish setting.
5
After you have changed the settings, turn off the sub power, then turn
off and on the main power.
!
Details
When you turn off and on the main power, you need to wait at least 10
seconds to turn on after turning off. If you do not allow a sufficient interval
in between, the machine may not run correctly.
17-118
Machine Manager Setting
VarioPrint 1105