Oce VarioPrint 1105 User Manual page 550

13
07 Temperature Adjustment
Perform this adjustment to control the condition of paste to be dried by set-
ting the temperature on the following sensors inside the melt tank.
- Melt Tank -Top: Melt tank temperature sensor/ Up (TH2)
- Melt Tank -Mid: Melt tank temperature sensor/ Md (TH3)
- Melt Tank -Low: Melt tank temperature sensor/ Lw (TH4)
- Pasting Roller: Pasting roller temperature sensor (TH1)
Reminder
Do not make unnecessary change of the temperature setting inside the
melt tank.
13-92
Adjustment
VarioPrint 1105