Oce VarioPrint 1105 User Manual page 398

10
- Check the job settings on the screen.
- If [Next] is active on the screen, touch it to proceed to the next
page.
- If making any setting change from the Check Screen, proceed to
the next step.
- If releasing any application function from the Check Screen, pro-
ceed to step 4.
- If a sample copy is needed, proceed to step 5.
- If settings are OK, proceed to step 7.
3
Change the settings from the Check Screen.
- Touch the desired copying condition key (Basic Setting/ Output Ap-
plication/ Special Image/ Application) on the Check Screen, then
touch [Change Setting].
- The LCD will display an appropriate screen to change the copying
condition selected. Change the setting as desired, then press
[Check] to restore the Check Screen to return to the checking
steps.
!
Details
When [Bookmark] has been checked on a subsequent screen, selecting
the application function key will jump to that screen. See "To Use Appli-
cation Function" on page 8-8 for details.
Reminder
Do not press [Stop] or [Reset] to change the setting, or all the settings will
restore the initial condition.
10-6
Advanced Information
VarioPrint 1105