Browser Control Setting
18.8.1 Logging in Using Administrator Mode
By logging into Web Connection in Administrator Mode, you can configure
or confirm the image controller system.
Procedure
1
Click the [Admin Mode] button in the upper left corner of the screen.
2
Enter the password for Administrator Mode and click the [Login] but-
ton.
3
To log out, click [Logout].
!
Details
The default value of the administrator password for Web Connection is
00000000.
You can change the administrator password for Web Connection using
the browser in the [System] area of Administrator Mode. For details, refer
to "Administrator Mode" on page 18-45. You can also change it using the
touch panel of the main body. Contact your service store for details.
VarioPrint 1105
18
18-43