Oce VarioPrint 1105 User Manual page 372

9
- Use Cover Trimming function to trim the cover by the amount automati-
cally estimated from the following formula, in the range from 3 mm to 40
mm in 0.1 mm increments.
– (Cover width) – (Body width × 2) – (Spine width)
- For specifications of the secondary (sub) tray, see p. 3-3 to p. 3-8.
*1: Specify the custom size of body set from the Paper Presetting Screen.
For details, refer to "Using Paper Not Specified for Any Tray (Paper Pre-
setting)" on page 6-53.
Specify the custom size of covers from the Perfect Binding Screen. For
details, see following pages.
*2: For 8.5"x11" body set to be bound with a cover sheet fed from tray 1
to 5, the maximum thickness will be less than 30 mm.
– Cover Trimming Off: 460 – (216 × 2) = 28 mm
– Cover Trimming On: 460 – (216 × 2) – (Trimming width 3 mm) = 25 mm
– If thickness of 8.5"x11" body set is more than that mentioned above, use
the cover feeding tray of Perfect binder or the tray of post inserter on
Folding unit to attach a cover.
*3: You can specify the paper weight available for body sets and covers
in Perfect Binding mode. For details, refer to "01 Useful Paper Weight Se-
lect" on page 17-43.
*4: The minimum/maximum number of sheets to be bound in Perfect
Binding can be changed according to the paper weight of body set. For
details, refer to "02 Paper Count Limit for Perfect Binding" on
page 17-45.
Also, the machine can be set to detect the thickness of body set and to
stop the binding operation temporarily if the width of the cover to be used
is unsuitable for the body set. For details, refer to "03 Stop Setting for P.
B. Cover Unfit Length" on page 17-47.
9-54
Setting Output Methods
VarioPrint 1105