Oce VarioPrint 1105 User Manual page 134

5
3
Adjust paper guides.
Positioning originals in Z-Folded original mode
Z-Folded original mode detects the folded original size without using the size
detection sensor of the ADF.
Note
For details, refer to "Copying Z-Folded Originals (Z-Folded)" on
page 6-16.
1
Arrange originals in order.
2
Position original(s) FACE UP in the document feeder tray.
- Place two-sided originals with page one FACE UP.
Up to 100 originals can be set at a time.
Reminder
Before placing originals in the tray, be sure the document feeder is closed
fully. Once closed, do not open the document feeder, otherwise the se-
lected copy conditions may be altered automatically.
Be sure not to use unsuitable ADF originals. For details, refer to "Unsuit-
able ADF Originals" on page 3-10.
3
Adjust paper guides.
5-18
Before Making Copies
VarioPrint 1105