Oce VarioPrint 1105 User Manual page 381

Setting Output Methods
6
Specify the spine width.
- Touch [Spine Width (1-30 mm)] to display the Spine Width Screen.
- Use the screen keypad, arrow keys + and ,, or the control panel
keypad to enter the desired value, then touch [OK].
7
Specify the cover trimming setting.
- Touch [On] to trim the cover, or [No] to deactivate this function.
!
Details
If the trimming width estimated by the machine does not fall within the
range from 3 to 40 mm, a message will be displayed to inform you that
the trimming mode is unavailable.
In this case, adjust the cover or spine width to enable this setting.
VarioPrint 1105
9
9-63