Oce VarioPrint 1105 User Manual page 188

6
3
Touch [1-2] on the Copy Screen to highlight it.
The [Memory Scan] key will be automatically highlighted on the screen.
Reminder
DO NOT press [Reset] at this point, otherwise the Memory Scan mode
will be released to disable the copier from scanning the original placed
on the original glass.
4
Select additional copy conditions, as desired.
5
Press [Start] to scan.
The front side image of the double-sided copy will be scanned into
memory.
6
Replace the original on the original glass with the back side image orig-
inal, then press [Start].
7
When all originals are scanned, touch Memory Scan to exit the Memory
Scan mode.
!
Details
To delete the scanned data without printing, press [Stop]. For details, re-
fer to "Scanning the job in Memory Scan mode" on page 5-26.
8
Press [Start] to print.
All the data in memory will be output.
6-42
Basic Job Settings
VarioPrint 1105