Oce VarioPrint 1105 User Manual page 400

10
5
Make a sample copy.
- Position originals in the ADF. Or, use Memory Scan mode to scan
all originals.
- Press [Proof Copy] on the control panel or touch [Proof Copy] on
the Check Screen.
- A sample copy will be output.
!
Details
Press [Stop] to suspend the proof copying. In this case, the scanned im-
age data will not be deleted from memory.
- You cannot change or release selections that appeared dimmed af-
ter proof copying.
!
Details
If the desired selection cannot be changed, press [Stop] to delete all the
data in memory, then press [Reset] to restart the job setting.
- If any setting change is required, return to step 3, then repeat proof
copying, as required.
- If the copy result is satisfactory, touch [Close] on the Check Screen
to return to the Copy Screen, then proceed to the next step.
6
Change the print quantity, as required.
7
Position originals, then press [Start].
If proof copying has been made, the machine will simply start printing
without scanning originals.
10-8
Advanced Information
VarioPrint 1105