Oce VarioPrint 1105 User Manual page 382

9
8
Make fine adjustments for the lead edge, trimming width, and image
position of the cover.
- Touch Fine Adjustment to display the Fine Adjustment Screen.
- To adjust the lead edge of the cover, touch [Cover Lead Edge Adj.]
- Use [+5–] to select positive/negative, then use the screen keypad,
arrow keys + and ,, or the control panel keypad to enter the de-
sired value.
- To adjust the trimming width, touch [Cover Trimming Adj.].
- Use [+5–] to select positive/negative, then use the screen keypad,
arrow keys + and ,, or the control panel keypad to enter the de-
sired value.
- To adjust the image position of the cover, touch [Cover Image Shift
Adj.].
- Touch [Front] or [Back] to select the printed side, then [Up/Down]
or [Right/Left] to select the direction to be adjusted.
- Use [+5–] to select positive/negative, then use the screen keypad,
arrow keys + and ,, or the control panel keypad to enter the de-
sired value.
- Touch [OK] to complete the setting.
9
Touch OK to return to the Copy Screen.
10
Select additional copy conditions, as desired.
- When making double-sided copies, select [1-2] or [2-2].
- If the original count exceeds 100, use Memory Scan mode.
9-64
Setting Output Methods
VarioPrint 1105