Oce VarioPrint 1105 User Manual page 481

Adjustment
Procedure
1
Touch [Adjustment] - [01 Machine Adjustment] - [03 Centring Adjust-
ment].
2
Touch [01 Printer Centring Adjustment] to display the Printer Centring
Adjustment Screen.
3
Select A3 paper, then press [Start] to output the sample pattern (No.
16).
4
Fold the output sheet at the centre to the direction of paper feed and
measure the distance between the lines on both sides.
5
If the desired result cannot be obtained, touch the [ADJUSTMENT] tab
to return to the Adjustment Screen.
6
Use the touch panel keypad to enter an appropriate value, then touch
[Set].
Available range: -64 (forward) to +63 (backward), 1 step = 0.1 mm.
7
Repeat steps 3 to 6 until the desired result is obtained.
8
Touch [Return] to restore the Centring Adjustment Menu Screen.
VarioPrint 1105
13
13-23