Oce VarioPrint 1105 User Manual page 991

Troubleshooting
APS selects the wrong paper size
Paper guides must be adjusted exactly to the size of originals.
In mixed original mode, a message to load a required paper size dis-
plays, even though that size is loaded in one of the trays
Paper sizes loaded in the trays must be consistent with the tray position size;
otherwise, the tray key on the Copy Screen will blink.
The copy screen does not display settings as described in Operator
Manual
Check with the machine manager, as Initial Settings may have been
changed.
"Please check original"
- This message appears when the copier detects a non-standard paper
size on the original glass.
- Select paper size and press [Start]. 1.000 magnification will be selected
automatically.
- If this message continues to be displayed after selecting paper size, se-
lect 1.000 magnification, even if it is already indicated, then press [Start].
If desired, ask your service representative to enable the machine to de-
fault to 1.000 magnification in this situation.
Sheet insertion result is not as expected
- Blank insertion:
Be sure manuscript originals do not already include blank sheets in the
locations designated for sheet insertion.
- Print insertion:
To ensure that chapter sheets in 1-2 mode always appear on the right
hand side in the finished set, insertion sheets must be designated on the
page setting screen with odd numbers, not even. If required, make an
even numbered original page odd by inserting a blank sheet in front of
that page, so that the blank sheet is even and the insertion sheet is odd.
Finisher staple result is not as expected
- The 2 staple position functions only on copy paper that is loaded vertical-
ly (portrait style).
- Check to see if Rotation functions. Release it, if necessary.
VarioPrint 1105
20
20-17