Configuring Kirk Wireless Server 6000; Powering Up The Kws6000 Server And Media Resource - Polycom KIRK 6000 Installation And Configuration Manual

Configuring KIRK Wireless Server 6000

Note

Powering up the KWS6000 Server and Media Resource

This section provides you with information on how to power up the KWS6000
and connect the unit to a computer. It also provides information on how to
configure a KWS6000 through the web based Administration Page using
either DHCP or static IP address.
The KWS6000 is pre-configured to use a static IP address.
This section includes information about:
"Powering up the KWS6000 Server and Media Resource"
•
• "Connecting a Computer to the KWS6000"
• "Accessing the Web Based Administration Page"
• "Configuring a KIRK Wireless Server 6000 Using Static IP Address"
page 10-7
• "Configuring a KIRK Wireless Server 6000 Using DHCP"
• "Checking Indicators"
• "Making a Back-Up of the Configuration File"
After installing the KWS6000 server you need to power up the unit using:
• Power supply for KWS6000: 8VDC, 1 W maximum when using local
power supply.
After installing the KWS6000 base station you need to power up the unit using:
• Power supply for KWS6000: 48VDC, 1 W maximum when using local
power supply.
on page 10-2
on page 10-15
10
on page 10-1
on page 10-3
on
on page 10-13
on page 10-15
10–1