Finding zones in a zone configuration
Use this procedure to locate all instances of a zone in the Zone Configs list on the Zone DB tab.
1. Select Configure > Zoning > Fabric.
2. Click the Zone DB tab if that tab is not automatically displayed.
3. Select an FC fabric from the Zoning Scope list.
4. Select the zone you want to find in the Zones list.
5. Click Find > between the Zones list and the Zone Configs list.
Finding a zone configuration member in the zones list
Use this procedure to locate a zone configuration member in the Zones list on the Zone DB tab.
1. Select Configure > Zoning > Fabric.
2. Click the Zone DB tab if that tab is not automatically displayed.
3. Select an FC fabric from the Zoning Scope list.
4. Select the zone configuration member (i.e., the zone) in the Zone Configs list that you want to
5. Click Find < between the Zones list and the Zone Configs list.
DCFM Enterprise User Manual
53-1001775-01
The Zoning dialog box displays.
This identifies the target entity for all subsequent zoning actions and displays the zoning
database for the selected entity.
Press SHIFT or CTRL and click each zone to select more than one zone.
•
If the zone is found, all instances of the zone are highlighted in the Zone Configs list.
•
If the zone is not found, a message displays informing you of this. Click OK to close the
message box.
The Zoning dialog box displays.
This identifies the target entity for all subsequent zoning actions and displays the zoning
database for the selected entity.
find in the Zones list.
Press SHIFT or CTRL and click each zone to select more than one zone.
•
If the zone is found, it is highlighted in the Zones list.
•
If the zone is not found, a message displays informing you of this. Click OK to close the
message box.
Finding zones in a zone configuration
22
647