Unix Systems; Troubleshooting The Linux Headless Installation - Brocade Communications Systems StoreFabric SN6500B Installation Manual

Performing a headless installation on Windows and UNIX systems
To perform a headless installation through the CLI, download the software (refer to
the software"
•
•

Troubleshooting the Linux headless installation

If you have completed all of the pre-Installation requirements and you are still unable to install the
application, run the following commands on the host.
1. Go to Install_Home/ (the directory containing install.bin).
2. Execute
3. Execute
4. Execute
5. Execute
6. Execute
7.
8. Execute
9. Execute
10. Execute
Network Advisor Installation and Migration Guide
53-1002699-01
on page 9).
For Windows systems, open a Command Prompt and execute this command:
install.exe -i silent -DUSER_INSTALL_DIR="C:\Program Files\Network
Advisor11.X.X"
For UNIX systems, open a UNIX shell and execute this command:
-DUSER_INSTALL_DIR="/opt/Network_Advisor11_X_X"
The application installs in silent mode using default settings.
To configure the application, refer to one of the following sections:
•
If this is a fresh installation, refer to
•
If you are upgrading from a previous version and need to migrate data, refer to
Migration" on page 41.
strace -f -F -v -s 1024 -o NetworkAdvisorinstall.txt ./install.bin
rpm -qa >> system.txt
ps -elf >> system.txt.
md5sum install.bin >> system.txt
df -k >> system.txt
Execute
sh -c "xterm -e echo nothing >> system.txt 2>&1".
env >> system.txt
sh -c "DISPLAY=:0.0 xterm -e echo nothing >> system.txt 2>&1"
zip support1.zip NetworkAdvisorinstall.txt system.txt
Send the support1.zip file output from the above (containing install.txt and system.txt) to
Technical Support. This file will help Technical Support isolate the issue.
"Network Advisor Configuration"
.
.
.
.
Headless installation
"Downloading
install.bin -i silent
on page 17.
"Data
.
.
1
.
15