3
Troubleshooting fabric discovery
Troubleshooting fabric discovery
If you encounter discovery problems, complete the following checklist to ensure that discovery was
set up correctly.
1. Verify IP connectivity by issuing a ping command to the switch.
2. Enter the IP address of the device in a browser to verify the http reachability.
Managed count exceeded troubleshooting
The following section states possible issues and the recommended solution when you exceed your
managed count limits.
46
The Discovery Status field details the actual status message text, which varies depending on
the situation. The following are samples of actual status messages:
•
Discovered: Seed Switch: Not registered for SNMP Traps
•
Discovered: Seed Switch: Not Manageable: Not registered for SNMP Traps
•
Discovered: Current seed switch is not recommended. Change Seed Switch. : Seed Switch:
Not registered for SNMP Traps
•
New Discovery Pending
a. Open the command prompt.
b. From the Server, type
For example, http://10.1.1.11.
ping
Switch_IP_Address
.
Brocade Network Advisor SAN User Manual
53-1003154-01